Electronics

Curly wire 4 lead

Item no.: KMP1172

Universal 4 lead curly wire to be fitted on a steeringwheel.
Curly wire is fitted with a 12pins DTM connector. 
Mating connector with 12 crimped wires also supplied.
Please contact K-M-P for a pin layout.  

Curly wire 6 lead

Item no.: KMP1171

Universal 6 lead curly wire to be fitted on a steeringwheel.
Curly wire is fitted with a AS6-10-35-PN connector
Mating connector with 12 crimped wires also supplied.
Please contact K-M-P for a pin layout.

Controlbox

Customer specific power controlbox: 
- 1 start switch
- 13 toggle switches
- 22 fuses (5 to 25 amps) 

Force sensor M8

Full water resistant
Easy to install with 2x M8 Rod-ends
Analoge voltoge output (0-5V)
DR-25 sleeving 
Compact size (24 mm x 24 mm)

 

Potentiometer

Contactless dual output gear potentiometer
DR-25 sleeving and 4 pins DTM connector
Special flexible boot glued on

Switchbox

Switchbox to convert an analoge signal to a digital signal
The powershift sensor detects a gearshift in both directions (UP & DOWN)
and can therefore also be used to activate an engine blipper on the downshift
Fully adjustable switch voltage

Small Single Pole Switch - Alternate

itemno: 05.10.00004

Small alternating switch
Diameter mounting hole: 6.4mm
On-On
Max rating: 6A 
Standard black cap

Small Single Pole Switch - Momentary

Itemno: 05.10.00005

Small momentary switch
Diameter mounting hole: 6.4mm
Normally open
Max rating: 6A 
Standard black cap

O-PUSH Switch - Momentary Small

Itemno: 05.11.00001

Black momentary switch
Diameter mounting hole: 12mm
Normally open 
Max rating: 5A 

O-PUSH Switch - Alternating Red

Itemno: 05.11.00003

Red Alternating switch
Diameter mounting hole: 16mm
Normally open 
Max rating: 20A  

O-PUSH Switch - Momentary STD

Itemno: 05.11.00002

Black momentary switch
Diameter mounting hole: 16mm
Normally open
Max rating: 20A  

Toggle Switch 2 Way

Itemno: 05.10.00001

2 way toggle switch
6,3mm legs 

Toggle Switch 3 Way

Itemno: 05.10.00001

3 way toggle switch
6,3mm legs 

AS/ASL connectors

Complete assortment available

DTM connectors

Complete assortment available

A-8000 series Button

Black - 05.11.01001
Red - 05.11.01002
Green - 05.11.01003

A-8000 series Button

Red - 05.11.00006

Black - 05.11.00007

Green - 05.11.00008

MK60 Race ABS wiring harness

Click here for the MK60 ABS wiring harness information sheet.

Crimp tool AS/L

Itemno: 05.01.99010

To be used for AS/L pins/sockets

Crimp tool DTM

Itemno: 05.01.99008

To be used for DTM pins and sockets